Makenier Vintage Tiffany Style Stained Glass 5 Light Dragonfly with dimensions 1100 X 871Tiffany Style Ceiling Fans – Hunter ceiling fans are without a doubt the top you should buy, here we have come up with everything you might need to understand ceiling fans before purchasing, please keep in mind there are many ceiling fan manufacturers out there who copy Hunter ceiling fan designs but you are nowhere close to as good, materials they normally use aren’t as good quality and they also cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so although ceiling fans may look “just being a Hunter,” remember all ceiling fans aren’t made the same. Most Hunter ceiling fans have a reverse option that is particularly important to cut back heating bills in the winter months, heated air could be directed right down to where it’s required by spinning the ceiling fan clockwise. Some points to take into consideration when choosing a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is really a comfort to nobody. One in the keys to proper air movement is blade pitch. The greater the pitch-the angle in the blade-the greater air movement providing the blade pitch may be properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and use just right or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the strain on undersized or under-powered motors. Many fans likewise use extra thin blades to cut back cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes plus the amount of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move little or no air, causing very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the results of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, despite the fact that they’re a typical method to obtain operating noise. A lack of proper dampening between metal parts also can create and intensify noise, as can the usage of extra thin sheet metal motor and mounting system parts. Hunter fans only use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that aren’t matched in carefully weighed and balanced sets also can wobble. Inconsistent blade mounting brackets can cause varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that may easily escape balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners also can help with wobble. Hunter fans have a patented wobble free canopy which means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly placed on/off pull chains may become faulty and stay got out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to advertise. Defective motor windings can cause electrical shorts in the motor. Low quality fan bearings may be “shielded” on one hand only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are utilized to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and liver spots start to appear. You may even see the brass on the fan is really a different colour compared to the light kit you merely added! Quality brass as well as other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, prevent the fan. Can you’re feeling an even protective coating? That’s a sign in the kind of quality you will find in the famous Hunter Bright Brass Finish.
What will be the minimum height I need during my room to set up an admirer? Safety standards claim that the min height through the floor on the bottom in the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that kind of record to stand on. So you get the peace of mind of knowing you may have the top-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the greater air that’s being moved. The air moved by the fan generates a wind chill effect that makes you’re feeling more at ease in the warm room. There is really a direct relationship between air movement and comfort – the greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with many additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag on the motor, scaling down the RPM in the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are prepared for optimal air delivery. How do I understand what size fan to get – there are so many sizes available? You need to choose the right size fan for any room to acquire optimum looks, comfort and energy savings. If the fan is way too small for your room, it will not move enough air to make you’re feeling comfortable. If the fan is way too big, it could possibly move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do a little fans require oil among others don’t? The Hunter Original includes a very unique motor which utilizes an oil-bath lubrication system. This system keeps the key bearings lubricated all the time, for quiet operation and long-life. It is part in the reason why this fan includes a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique in the market when compared with all the fans? The Hunter Original will be the most unique ceiling fan on the market, which has a design that dates back on the turn in the last century. Cast iron is employed in the motor housing construction to more efficiently draw heat away through the electrical windings; heat is really a major enemy of electrical motors. The extra weight in the cast-iron construction also cuts down on prospect of fan wobble. The motor is also bigger than another ceiling fan, rendering it the strongest motor available. This allows the blades to be pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components in the motor, and prolongs the life span in the motor. Added up, these unique design elements develop a powerful, quiet fan that’s backed by a limited lifetime warranty.
How do fans cool the space – would they actually lower the temperature? A ceiling fan cools by making a wind chill effect; no lower the space temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration onto the skin. It will be the feeling you receive whenever you open the window in the moving car. If you have a ceiling fan in the room whose temperature is 80 degrees, running the fan can cause a wind chill effect that makes you’re feeling as though the temperature is 72 degrees. When employed in conjunction having an ac, a ceiling fan can lower energy costs, because you can set the thermostat of one’s ac at a higher temperature.
Can the ceiling fan be utilized in the winter months for any beneficial purpose? A ceiling fan might help lower energy consumption in the winter months by up to 15%. The temperature in the air in the heated room varies in layers; air near the ceiling is warmer compared to the air near the floor, because heated air rises. A ceiling fan might help push the warmer air that’s trapped near the ceiling back off into the space, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it’s needed, and the heat won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan needs to be run in the clockwise direction. This pushes air up against the ceilings and around the walls, to softly re-circulate the heated air without making a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan run using high-speed will consume less power compared to a 100-watt bulb. How much can I expect you’ll save in heating and even cooling costs? A ceiling fan can conserve up to 95% on cooling costs for any new install and 47% with an existing air cooling system. It also can save up to 15% on heating costs. Savings will be different according to energy rates. How easy is really a ceiling fan to setup? Most people are certain to get a mason to setup a ceiling fan, it could be a DIY project but please take into account you will need to be able to: Locate a 2″ x 4″ or any other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is roofed by the fan warranty – what makes the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for your stated life in the warranty; that’s, a 20-year warranty will cover the motor parts for 20 years. Labour for your motor is normally covered for 1-year, as are parts and labour for all the components in the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with over 115 a lot of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans could be adjusted having an accessory remote device sold separately through the fan. In fact, remote controls really can increase the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and lightweight remote controls can easily be installed either using the fan during new installations or on fans that have been previously installed and in use for some time. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands on the fan as well as a receiver which either conceals in the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away through the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans could be placed on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest on the ceiling which takes care of the electrical box) which may be meant to accommodate sloped ceilings. Many quality fans will incorporate this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included using the fan at original purchase, accessory canopy adapters can be bought separately at retail stores. What length drop rod should I use with my fan? Will the fan be a little more susceptible to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for your dimension in the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod so that you can properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a lesser clock pendulum which has a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it’s in the ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that won’t develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum simply because they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled through the same wall switch? The answer here is determined by how your wall switch is wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you do not get a control created specifically for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up in the single wall switch and get a more common, dual control which will operate an admirer and lightweight separately from a single switch. Having a mason install a third wire could be expensive. What will be the difference in having a ceiling fan installed close on the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet above the floor. Extension drop rods are utilized to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to rate the fan at 8 feet (one foot must be allowed for your distance through the top in the fan motor on the switch housing bottom.
